CapHat - Capacitance Hat
These Caphats are Compatible with the Hi-Q-6 Models ONLY.
For Caphats for Hi-Q-2.5, Hi-Q-3, H-Q-4, Hi-Q-5 Models please visit our
CapHat comes with a stainless steel 3/8-24 stud and 3/8-24 threaded hole for the whip. It has four "lobes" -- No dangerous rods sticking out! Constructed of nickel plated hub, four 3/32 dia. 304 SS lobes.
- CapHat MUST be used with either a 1' or 2' long extension rod, NOT
directly on top of the loading coil.
- When the #2 size is used on the Hi-Q-3/80 antenna, it REMOVES 14 turns of the 56 from the loading coil. Or you can shorten the whip by at least 3'.
- When the # 3 CapHat is used on the Hi-Q-3 the resonant frequency is: 3.700 MHz WITH NO WHIP! Therefore now you have a 4' tall antenna.
- Whichever CapHat you choose, you will need either the 1 foot or 2 foot long Extension Rod, your choice.
More Photos in the Photo Gallery >
< Back to List of Accessories
Copyright 2003, All Rights Reserved. "Hi-Q-Antennas" is the registered Trademark of Charles M. Gyenes
Web Site Design and Hosting by QTH.COM